If you want to simplify installing an aftermarket in dash stereo receiver in your 3rd generation Acura TL covering years 2007 to 2008. Then this radio installation kit is complete with everything you will need to install a new stereo in your Acura TL. This kit includes the necessary components to complete the installation and is already wired for your specific radio so all you have to do is plug everything in and start enjoying your new radio.
The harness provided in this kit is wired with all the connections needed to install your aftermarket radio and will allow you to retain the factory amplifier, subwoofer, steering wheel controls, backup camera, and navigation. This kit is used for vehicles both with and without navigation. Using our kit to install your aftermarket radio will result in the loss of the center channel audio.
The components included in this complete install kit are:
- Radio Specific Wiring Harness
- Factory Antenna Adapter
- ABS Molded Dash Kit
- 20 Pin Blue Radio Harness
- 40 Pin Grey Radio Harness
- AXSWC Steering Wheel Control Module
In order for the radio you plan to install to work with this complete kit you will need it to have at least 6 RCA pre-amp outputs dedicated for audio. These ports are often red/white in color. If you send us a message with your radios model number we can confirm if it will work or not. As a general rule most double din radios with a cost higher than $100 will offer 6 RCA outputs.
Disclaimer: All of our harnesses result in the loss of the center channel speaker and your factory navigation sound guidance.