This plug and play 4 channel amp will power the door speakers and rear deck speakers only. By installing this amplifier you will lose the center channel and subwoofer. This amplifier is recommend to those who are already running aftermarket subwoofers or a dedicated subwoofer amp but want the speakers in the doors to be louder. This is a plug and play upgrade that will fit right into the factory location. This amplifier can be used with the factory radio or an aftermarket radio.
This upgrade can be used with factory speakers or aftermarket speakers the power ratings are as follows. This upgrade is plug and play so it doesn’t require any new power or ground lines. These are the amp ratings.
- POWER @ 2-OHMS = 4 x 80W
- POWER @ 4-OHMS = 4 x 40W
This package is already wired and preconfigured so all you have to do is plug it in. If you are not using the factory radio and you did not install an aftermarket radio with our accessories you must feed the amp a low level signal so if you don’t your amp will blow. If you are using the factory radio you do not have to worry.
If you feel that this package does not have enough power you can use our bypass kit to install your own amplifier easily. Please keep in mind that if you are going to power each speaker with more than 100 watts RMS then we recommend running new speaker wires and suggest you do not use our amp bypass.