If you are tired of the factory amplifier this harness will help you bypass all the tricky wiring and go straight to the speakers from one central location. This harness is over 17 inches long it can easily reach from the factory amp location to the trunk or behind the radio. This makes it easy to install your aftermarket amp wherever you decide You just have to run RCAs and the power cables from your aftermarket radio. Also included in this package is the harness that will allow you connect to the output side of the factory radio allowing you to use this harness combination with the factory radio to add an amplifier or with an aftermarket radio.
All the wiring you need to add your system is in one location and the RCA outputs are labeled with FL, FR, RR, RL, CENTER, and SUB. The harness with all the outputs also provides and amp turn on wire that is blue with a quick connect on the end to attach your amplifier remote wire.
The colors on the speaker wire harness are as follows:
Gray – Passenger Front positive speaker and tweeter
Gray w/black stripe – Passenger Front negative for speaker and tweeter
White – Drivers Front positive speaker and tweeter
White w/ black stripe – Drivers Front negative speaker and tweeter
Purple – Passenger Rear positive speaker
Purple w/ black stripe – Passenger Rear negative speaker
Green – Drivers Rear positive speaker
Green w/ black stripe – Drivers Rear negative speaker
Green w/ white stripe – subwoofer positive
Gray w/ yellow stripe – subwoofer negative
White w/ red stripe – center speaker negative
Gray w/ blue stripe – center speaker positive
There are several five channel amps that will work with the factory system remember all of the factory speakers are 2 ohms and most are rated for just 20 watts so unless you replace all the speakers choose the amp carefully as not to blow them.