Description
If you want to simplify installing an aftermarket in dash stereo receiver in your 1st generation Acura TSX covering years 2004 2005 2006 2007 2008. Then this radio installation kit is complete with everything you will need to install a new stereo in your Acura TSX. This kit includes the necessary components to complete the installation and is already wired for your specific radio so all you have to do is plug everything in and start enjoying your new radio.
The harness provided in this kit is wired with all the connections needed to install your aftermarket radio and will allow you to retain the factory amplifier, all speakers, steering wheel controls, climate controls and navigation. This kit is used for vehicles both with and without navigation. Your factory radio and navigation will have no audio. This means handsfree link and audio guidance from the navigation will be disabled. XM, Factory AUX and OnStar will also no longer work.
The components included in this complete install kit are:
- Radio Specific Wiring Harness
- ABS Molded Dash Kit
- 20 Pin Blue Radio Male Harness
- 20 Pin Grey Radio Female Harness
- AXSWC Steering Wheel Control Module
In order for the radio you plan to install to work with this complete kit you will need it to have at least 4 RCA pre-amp outputs dedicated for audio. These ports are often red/white in color. If you send us a message with your radios model number we can confirm if it will work or not. As a general rule most double din radios with a cost higher than $100 will offer 6 RCA outputs.
Disclaimer: Upgrading the radio in your TSX will result in the loss of the factory aux, xm radio and your factory navigation sound guidance. Also some radios require permanent modifications of the sub dash behind the radio.
Reviews
There are no reviews yet.