If you are looking for an instruction video instead click here. Also for videos on how to remove your door panel please click the links below.
1999-2003 TL
2004-2008 TL
2009-2014 TL
2004-2008 TSX
2009-2014 TSX
2001-2006 MDX
2007-2013 MDX
2014-2020 MDX
2007-2013 RDX (please contact us)
2013-2022 ILX
2015-2022 TLX
2015-2020 RLX (please contact us)
These instructions are for 2009-2020 Acura Speakers for the instructions on how to install the speakers on other years use the links above.
-
-
- Remove the screw securing the factory speaker
- pull the factory speaker forward and lift up.
- Disconnect and remove the factory speaker. Leave the top clip inserted into the door panel.
- Install the two white inserts. The metal screw is for the top the black screws for the bottom.
- Install the speaker gasket onto the spacer.
- line up the spacer with the corresponding holes on the door panel. Screw the spacer into place
- Connect the speaker harness to the factory harness. Connect the harness to the aftermarket speaker.
- Mount the speaker onto the spacer and test the speaker.
- Pry the tweeter panel away from the door
- Disconnect the tweeter and carefully pry the tweeter out of the factory housing.
- Prepare the tweeter and tweeter cup for installation. Add the necessary foam to reduce any rattle.
- Install the tweeter on the factory housing and adjust the tweeter cup until it clicks into place.
- Connect the tweeter harness to the factory harness and aftermarket tweeter.
- Secure the wiring and install the tweeter housing back onto the door panel.
- Remove the screw securing the factory speaker
-
